أكواد موتورولا السرية والحيل والقوائم المخفية (2026)

Moto stock-Android codes

أكواد اختبار العتاد واللمس في Motorola

تبحث عن كود اختبار Motorola لفحص هاتفك؟ تفتح هذه الأكواد من قاعدة بياناتنا شاشات اختبار أو معلومات مدمجة. تختلف القوائم حسب الطراز وإصدار البرنامج والمنطقة والمشغّل.

Touchscreen Test

*#*#2664#*#*

Tests touch response across the display.

إدخال موثّق · التوفر يختلف

Vibration & Backlight Test

*#*#0842#*#*

Tests the vibration motor and screen backlight.

إدخال موثّق · التوفر يختلف

Testing & Usage Menu

*#*#4636#*#*

Phone info, battery status and usage statistics.

إدخال موثّق · التوفر يختلف

GPS Test

*#*#1472365#*#*

Runs a quick GPS lock test.

إدخال موثّق · التوفر يختلف

لا يوجد كود اختبار واحد من Motorola يعمل على كل الهواتف. إذا لم يستجب الكود فهذا لا يعني وجود عطل في العتاد. استخدم اختبارات القراءة فقط وتجنّب المعايرة وإعادة الضبط وإعدادات الهندسة.

فحوصات اللمس والشاشة والعتاد في Motorola

فحوصات موجّهة تجريها على هاتفك، وليست قياسات من المتصفح ولا تشخيص إصلاح. القراءة مجانية.

حيل وميزات Motorola المخفية

هذه ميزات مدمجة في Motorola، وليست أكواد اتصال أو ثغرات. لا تحتاج إلى روت وهي منفصلة عن قائمة الأكواد السرية. قد تختلف أسماء القوائم حسب إصدار البرنامج.

  1. 1. Chop twice for the flashlight (Fast flashlight)

    Open the Moto app > Gestures > Fast flashlight and switch it on. Hold the phone firmly and make two quick chopping motions to turn the torch on; chop twice again to turn it off.

    ملاحظة الإصدار: On some newer models the gestures sit in Settings > Gestures instead of the Moto app.

  2. 2. Twist twice to open the camera (Quick capture)

    Moto app > Gestures > Quick capture. Twist your wrist twice to launch the camera from any screen, even when the phone is locked; twist twice again to flip between the rear and front cameras.

  3. 3. Three-finger screenshot

    Moto app > Gestures > Three-finger screenshot. Touch and hold the screen with three fingers to capture it, which is easier than pressing Power + Volume down with one hand.

  4. 4. Flip for Do Not Disturb

    Moto app > Gestures > Flip for DND. Place the phone face down on a table and it silences calls and notifications until you pick it up again.

  5. 5. Attentive Display

    Moto app > Display > Attentive Display (or Settings > Display on recent My UX builds). The front camera checks whether you are looking at the screen so it doesn't dim or sleep while you read.

    ملاحظة الإصدار: Not every Motorola model includes it.

  6. 6. Peek Display

    Moto app > Display > Peek Display. When a notification arrives, the screen lights up with minimal icons; touch and hold one to preview the message without unlocking the phone.

  7. 7. Moto Gametime

    Moto app > Play > Gametime (shown as Settings > Gametime on some versions). Add your games; while playing, swipe in from the screen edge to block calls and notifications, lock brightness and take screenshots.

  8. 8. Ready For (PC, TV and monitor)

    Settings > Connected devices > Ready For. Connect to a Windows PC, TV or monitor by cable or wirelessly to use your apps on a bigger screen, run video calls through the phone camera or play games.

    ملاحظة الإصدار: Supported only on selected Edge and higher-end G models; check whether the menu exists on yours.

  9. 9. Device Help hardware diagnosis

    Open the Device Help app (pre-installed on most Motorola phones) > Device diagnosis to test the touchscreen, speakers, microphone, sensors and battery with guided checks — a safer alternative to hidden dialer menus.

    ملاحظة الإصدار: Older phones may show this inside the Moto app or Settings > About phone.

  10. 10. Moto Secure and the Secure Folder

    Open the Moto Secure app (or Settings > Security > Moto Secure). Turn on Secure folder to hide apps and files behind a separate PIN, and use the network protection and privacy checks in the same app.

    ملاحظة الإصدار: Available on Motorola phones running Android 12 and later with My UX.

Motorola secret codes follow the stock Android pattern closely, since Moto builds add relatively little on top of the platform. The practical result is that the standard testing menu, battery and usage statistics screens, and Wi-Fi and cellular information panels all work as documented, alongside Motorola's own hardware self-test for the display, sensors and audio path.

For everyday troubleshooting the sequence most people need is simple: read the battery statistics to see whether capacity or a rogue app is draining the device, then open the phone information panel to check which network type the radio is actually using, and finally run the display and touch test if you suspect a physical fault.

Motorola devices sold through carriers sometimes have USSD strings intercepted by the operator, so a code that works on an unlocked Moto handset may return an error on a branded one. That is a network restriction rather than a device fault, and swapping SIMs is the quickest way to confirm it.

Checking a used Motorola handset? Run its IMEI through our free IMEI checker — dial *#06# to reveal the 15-digit number.

Full Motorola secret code list (38 codes)

Every code below is documented from public device and service documentation. 1 of them are destructive and will erase user data instantly — they are marked in red.

Motorola secret codes with description, category and risk level
CodeWhat it doesCategoryRisk level
Factory Data Reset. Performs a factory data reset. All user data will be lost.resetDestructive — erases data
Show IMEI. Displays the device IMEI number.infoSafe — read only
Testing & Usage Menu. Phone info, battery status and usage statistics.diagnosticsSafe — read only
Vibration & Backlight Test. Tests the vibration motor and screen backlight.hardware-testSafe — read only
Touchscreen Test. Tests touch response across the display.hardware-testSafe — read only
Service Menu. Opens Motorola's service menu for hardware testing.diagnosticCaution — changes settings
Wi-Fi MAC Address. Displays the device's Wi-Fi MAC address.infoSafe — read only
GPS Test. Runs a quick GPS lock test.diagnosticsSafe — read only
Call Forwarding Status. Shows whether all-call forwarding is active and to which number.networkSafe — read only
Forwarding When Unanswered. Shows the number that receives calls you don't answer.networkSafe — read only
Forwarding When Unreachable. Shows where calls go when your phone is off or has no signal.networkSafe — read only
Forwarding When Busy. Shows the number that receives calls while you're on another call.networkSafe — read only
Cancel All Forwarding. Turns off every type of call forwarding on the line.networkCaution — changes settings
Caller ID Status. Shows whether your number is hidden or shown on outgoing calls.networkSafe — read only
Wireless LAN Test. Opens the Wi-Fi / wireless LAN test screen.hardware-testSafe — read only
LCD Display Test. Opens the screen test suite (colors, dead pixels, touch).hardware-testSafe — read only
Proximity Sensor Test. Verifies the proximity sensor used to blank the screen during calls.hardware-testSafe — read only
Audio / Melody Test. Runs a speaker and audio playback test.hardware-testSafe — read only
Bluetooth Test. Opens the Bluetooth hardware test screen.hardware-testSafe — read only
Camera Information. Shows camera firmware details. Avoid the firmware-update option unless you know what you're doing.diagnosticsCaution — changes settings
Field Test (GSM). Runs a GSM field/signal test.diagnosticsSafe — read only
Call Waiting Status. Shows whether call waiting is currently enabled.networkSafe — read only
Service Mode. Opens the service/test mode menu on many devices. Advanced — for diagnostics only.diagnosticsCaution — changes settings
Call Barring Status. Shows whether outgoing/incoming call barring is switched on.networkSafe — read only
Enable Call Waiting. Turns on call waiting so a second caller can reach you mid-call.networkCaution — changes settings
Disable Call Waiting. Turns off call waiting.networkCaution — changes settings
Build & Version Info. Shows PDA, phone, CSC and build-time information.infoSafe — read only
Touchscreen Firmware Version. Displays the touchscreen controller firmware version.hardware-testSafe — read only
RAM Version. Shows the device RAM type/version.infoSafe — read only
Packet Loopback Test. Runs an audio/packet loopback hardware test.hardware-testSafe — read only
Melody / Audio Test. Plays a test melody to check the speaker.hardware-testSafe — read only
Bluetooth Address. Displays the device's Bluetooth MAC address.infoSafe — read only
Advanced GPS Test. Opens a detailed GPS/location diagnostics screen.diagnosticsSafe — read only
PDA / Phone / RF Info. Shows PDA, phone, hardware and RF firmware version details.infoSafe — read only
Power-Button Behaviour. Changes what the power button does on long-press (end call vs menu). Changes a setting.diagnosticsCaution — changes settings
Backup Media Files. Opens a file-copy screen to back up media (photos, videos, audio).diagnosticsCaution — changes settings
MediaTek Engineer Mode. Opens the engineer menu on MediaTek (MTK) chipset phones. Advanced — changing values can affect radios.diagnosticsCaution — changes settings
Google Talk Service Monitor. Legacy GTalk service monitor screen (older Android).Community-reported · unverifieddiagnosticsSafe — read only

How to use Motorola codes

  1. Open the Moto Phone app and go to the keypad, exactly as if you were dialling a number.
  2. Type the code precisely as shown, including the leading * and the trailing #. Autocorrect and paste can drop characters, so type it out.
  3. Most sequences fire the moment the final character is entered — you usually do not press call.
  4. If the screen does not change, press the call button once; a few USSD strings need it.
  5. Back up photos, messages and app data before running anything marked destructive, then confirm you are on the right device.
  6. Nothing at all happening usually means the code is disabled on your firmware or blocked by your carrier — it is not a fault with your handset.

أكواد اختبار Motorola — الأسئلة الشائعة

ما هو كود اختبار Motorola؟

تعمل هواتف Motorola بواجهة My UX القريبة من Android الأصلي، لذا يستخدم رمز اختبار Motorola الرئيسي في قاعدة بياناتنا، *#*#2664#*#*، صيغة Android ‏*#*#. في الطرازات المدعومة يفتح اختبار اللمس أو العتاد؛ وكثير من الطرازات الأحدث يتجاهله.

كيف أُجري اختبار عتاد على Motorola؟

اكتب الرمز في لوحة مفاتيح تطبيق الهاتف كما هو تمامًا، بكل نجمة وعلامة #. إن لم يُفتح أي اختبار فإن تطبيق Device Help من Motorola، حيث يتوفر، يتضمن فحوصًا للشاشة واللمس والصوت والمستشعرات.

ما هي أكواد القائمة المخفية في Motorola؟

لأن My UX قريبة جدًا من Android الأصلي، فإن رموز Motorola المخفية مثل *#*#4636#*#*, *#*#2664#*#*, *#*#1472365#*#* هي غالبًا رموز خدمة Android قياسية لمعلومات الهاتف وقوائم الاختبار. استخدم شاشة المعلومات للقراءة فقط ولا تغيّر خيارات الراديو أو الشبكة.

هل تعمل أكواد اختبار Motorola على كل الطرازات؟

لا. يختلف البرنامج بين سلاسل Moto G وEdge وRazr وحسب المشغل، وقد تزيل تحديثات Android قوائم الاختبار. إن فشل الرمز فاستخدم Device Help أو فحوصاتنا الموجّهة؛ فشل الرمز وحده ليس عطلًا في العتاد.

ما أفضل ميزات موتورولا المخفية؟

أفضلها إيماءات تطبيق Moto: حركتا تقطيع لتشغيل المصباح، ولفّ المعصم مرتين لفتح الكاميرا، ولقطة الشاشة بثلاثة أصابع. وتجعل Peek Display وAttentive Display الشاشة أذكى. تعتمد الأسماء الدقيقة على إصدار My UX لديك.

هل لدى موتورولا حيل سرية؟

نعم، لكنها ميزات رسمية في My UX: Moto Gametime للألعاب، وReady For في الطرز المدعومة لاستخدام الهاتف على حاسوب أو تلفاز، وMoto Secure لمجلد خاص، وDevice Help لفحص العتاد. تعمل دون روت وهي منفصلة عن أكواد مثل *#*#2664#*#*.

هل تدعم جميع هواتف Motorola الرموز السرية نفسها؟

لا. يعتمد دعم الرموز على الطراز وإصدار البرنامج الثابت، وفي كثير من الحالات على شركة الاتصالات التي وفّرت الهاتف. غالبًا ما تتيح طرازات Motorola القديمة قوائم خدمة أكثر من الإصدارات الأحدث، لأن الشركات المصنّعة تقيّد تدريجيًا الوصول إلى الأدوات الهندسية بتطبيقات تشخيص موقّعة. إذا لم يفعل الرمز شيئًا، فمن شبه المؤكد أنه أُزيل أو عُطّل في إصدار نظامك، وليس أنك أدخلته بشكل خاطئ.

هل من الآمن طلب الرموز السرية لهواتف Motorola؟

الرموز التي نصنّفها «آمنة» تعرض المعلومات فقط أو تفتح قائمة اختبار للقراءة فقط، لذا لا يمكنها إتلاف هاتفك. أما الرموز المصنّفة «تتطلب الحذر» فتغيّر إعدادًا أو تبدأ إجراءً على المكوّنات ينبغي أن تفهمه أولًا، والرموز المصنّفة «مدمّرة» تمسح بيانات المستخدم فورًا دون نافذة تأكيد. أنشئ دائمًا نسخة احتياطية قبل تشغيل أي رمز من الفئة المدمّرة.

لماذا لا يحدث شيء عند إدخال رمز؟

هناك ثلاثة أسباب شائعة: الرمز غير مدعوم في برنامجك الثابت، أو مشغّل الشبكة حظر سلسلة USSD، أو تطبيق الاتصال يتطلب الضغط على زر الاتصال لهذا التسلسل تحديدًا. جرّب الرمز باستخدام بطاقة SIM مختلفة أو في وضع الطيران، وتأكد من كل محرف، بما في ذلك النجمة في البداية وعلامة المربع في النهاية.

هل يؤدي استخدام هذه الرموز إلى إبطال ضمان Motorola؟

مجرد قراءة معلومات التشخيص لا يُبطل الضمان. لكن تغيير إعدادات نطاقات الاتصال اللاسلكي، أو تنفيذ عمليات كتابة في قائمة هندسية، أو إجراء تهيئة المصنع قد يترك جهازك في حالة يعتبرها مركز الخدمة ناتجة عن المستخدم. التزم برموز القراءة فقط ما لم تكن تتبع إرشادات إصلاح رسمية.

هل يمكن لهذه الرموز إلغاء قفل الشبكة لهاتف Motorola؟

لا. يتطلب إلغاء قفل الشبكة رمز إلغاء قفل تصدره شركة الاتصالات أو طلبًا رسميًا عبر مشغّلك. أي موقع يعدك برمز اتصال مجاني وشامل لإلغاء القفل يضللك. الرموز المدرجة هنا تتيح فقط التشخيص وحالة الشبكة ومعلومات البرنامج الثابت وإجراءات إعادة ضبط المصنع.

كيف أعثر على IMEI في جهاز Motorola؟

اطلب *#06# على أي هاتف GSM أو LTE، بما في ذلك جميع طرازات Motorola، وسيظهر IMEI فورًا. يمكنك أيضًا التحقق من الرقم باستخدام أداة فحص IMEI لدينا، التي تطبّق المجموع الاختباري بخوارزمية لون الذي تستخدمه GSMA لاكتشاف أرقام IMEI المدخلة خطأً أو المختلقة.

أدلة إصلاح مشاكل Motorola

كل أدلة Motorola ←