Foondiagnosehulpmiddel

Nie seker of jou hardeware besig is om te faal nie? Voer hierdie begeleide kontroles uit met jou foon se ingeboude diagnostiese kodes.

Raak-, skerm- en sensortoetse

Dit is begeleide kontroles op jou foon, nie blaaiermetings of ’n hersteldiagnose nie. Geen betaling of aflaai is nodig om dit te lees nie.

Raaktoets

Maak die skerm skoon en droog, ontkoppel die laaier en verwyder ’n beskadigde beskermer. Trek aaneenlopende lyne oor die middel en rande in ’n tekenprogram. Gapings of onverwagte merke kan probleme aandui; herhaal ná herbegin. Volg die instruksies indien ’n ingeboude spyskaart ’n aanraakrooster bied.

Skermtoets

Bekyk soliede rooi, groen, blou, wit en swart beelde teen matige helderheid. Soek dooie pixels, verkleuring en flikkering. Vergelyk met ’n ander skerm: ’n skermgreep wys nie ’n fisiese paneelfout nie. Moenie op die paneel druk nie.

Sensortoets

Kontroleer outomatiese rotasie in ’n ondersteunde toepassing. Bedek en ontbloot die nabyheidsarea tydens ’n gewone oproep en kyk of die skerm af- en aanskakel. Omhulsels of beskermers kan inmeng. Gebruik sensortoetse net indien jou model dit bied; hierdie kontroles sertifiseer nie elke sensor nie.

Toetskodelyste per handelsmerk

Display & Touchscreen

Verify screen colour uniformity, dead pixels, and touch responsiveness across the whole panel.

*#0*#
1. Dial the code to open the built-in test menu.\n2. Cycle Red, Green, Blue and White screens — look for dead or stuck pixels.\n3. Run the touch test and draw across every edge to confirm digitizer response.

Battery Health

Check current battery voltage, temperature and charging behaviour.

*#*#4636#*#*
1. Dial the code and open Battery information.\n2. Note the current charge, temperature and health status.\n3. Compare voltage under load vs idle to spot a degrading cell.

Network & Signal

Inspect signal strength, cell ID and neighbouring towers.

*3001#12345#* (iOS) / *#*#4636#*#* (Android)
1. Dial the code for your platform.\n2. Read the signal in dBm — closer to 0 is stronger.\n3. Note cell ID and PLMN for troubleshooting weak-signal areas.

Sensors

Test accelerometer, gyroscope, proximity and light sensors.

*#0*#
1. Open the test menu.\n2. Select Sensors and verify each sensor reacts to motion, light, or covering the proximity area.\n3. Fail any sensor that does not update.

Speaker & Vibration

Confirm the earpiece, loudspeaker and vibration motor all fire.

*#*#0842#*#*
1. Run the vibration test — the phone should pulse.\n2. Run the melody / speaker test and listen for distortion.\n3. Place a call to verify the earpiece.

Camera

Trigger front and rear cameras through the diagnostic menu to spot lens or sensor failures.

*#0*#
1. Open the built-in test menu.\n2. Launch front and rear camera tests.\n3. Look for stuck pixels, discolouration, or autofocus failures.

GPS

Verify GPS satellite lock and location fix accuracy.

*#*#1472365#*#*
1. Dial the code and start the GPS test.\n2. Move outdoors and wait up to 60 seconds for a fix.\n3. Confirm satellites in view and accuracy in metres.