Alat Diagnostik Ponsel

Tidak yakin apakah perangkat keras Anda bermasalah? Jalankan pemeriksaan terpandu ini menggunakan kode diagnostik bawaan ponsel Anda.

Pemeriksaan sentuh, layar & sensor

Ini pemeriksaan terpandu pada ponsel, bukan pengukuran melalui browser atau diagnosis perbaikan. Membacanya tidak memerlukan pembayaran atau unduhan.

Tes sentuh

Bersihkan dan keringkan layar, lepas pengisi daya, dan lepaskan pelindung yang rusak. Di aplikasi menggambar, buat garis terus-menerus di tengah dan semua tepi. Celah atau tanda tak terduga dapat menunjukkan masalah; ulangi setelah memulai ulang. Jika menu bawaan menyediakan kisi sentuh, ikuti petunjuknya.

Tes layar

Lihat gambar merah, hijau, biru, putih, dan hitam penuh dengan kecerahan sedang. Periksa piksel mati, perubahan warna, dan kedipan. Bandingkan dengan layar lain: tangkapan layar tidak menunjukkan kerusakan fisik panel. Jangan menekan panel.

Tes sensor

Periksa rotasi otomatis di aplikasi yang mendukungnya. Saat panggilan biasa, tutup dan buka area sensor kedekatan lalu amati apakah layar mati dan menyala kembali. Casing atau pelindung dapat mengganggu. Gunakan tes sensor hanya jika tersedia pada model; pemeriksaan ini tidak memastikan semua sensor sehat.

Daftar kode tes per merek

Display & Touchscreen

Verify screen colour uniformity, dead pixels, and touch responsiveness across the whole panel.

*#0*#
1. Dial the code to open the built-in test menu.\n2. Cycle Red, Green, Blue and White screens — look for dead or stuck pixels.\n3. Run the touch test and draw across every edge to confirm digitizer response.

Battery Health

Check current battery voltage, temperature and charging behaviour.

*#*#4636#*#*
1. Dial the code and open Battery information.\n2. Note the current charge, temperature and health status.\n3. Compare voltage under load vs idle to spot a degrading cell.

Network & Signal

Inspect signal strength, cell ID and neighbouring towers.

*3001#12345#* (iOS) / *#*#4636#*#* (Android)
1. Dial the code for your platform.\n2. Read the signal in dBm — closer to 0 is stronger.\n3. Note cell ID and PLMN for troubleshooting weak-signal areas.

Sensors

Test accelerometer, gyroscope, proximity and light sensors.

*#0*#
1. Open the test menu.\n2. Select Sensors and verify each sensor reacts to motion, light, or covering the proximity area.\n3. Fail any sensor that does not update.

Speaker & Vibration

Confirm the earpiece, loudspeaker and vibration motor all fire.

*#*#0842#*#*
1. Run the vibration test — the phone should pulse.\n2. Run the melody / speaker test and listen for distortion.\n3. Place a call to verify the earpiece.

Camera

Trigger front and rear cameras through the diagnostic menu to spot lens or sensor failures.

*#0*#
1. Open the built-in test menu.\n2. Launch front and rear camera tests.\n3. Look for stuck pixels, discolouration, or autofocus failures.

GPS

Verify GPS satellite lock and location fix accuracy.

*#*#1472365#*#*
1. Dial the code and start the GPS test.\n2. Move outdoors and wait up to 60 seconds for a fix.\n3. Confirm satellites in view and accuracy in metres.