Kasangkapan sa Pagsusuri ng Telepono

Hindi ka sigurado kung pumapalya na ang mga pisikal na bahagi ng iyong telepono? Isagawa ang mga pagsusuring ito na may gabay gamit ang mga nakapaloob na kodigo sa pagsusuri ng iyong telepono.

Mga touch, screen at sensor check

Mga gabay ito sa pagsusuri sa telepono, hindi mga sukat mula sa browser o diagnosis para sa repair. Walang bayad o download para basahin ang mga ito.

Touch test

Linisin at patuyuin ang screen, tanggalin ang charger at alisin ang sirang protector. Sa drawing app, gumuhit ng tuloy-tuloy na linya sa gitna at mga gilid. Ang puwang o hindi inaasahang marka ay maaaring senyales ng problema; ulitin matapos mag-restart. Kung may touch grid sa built-in menu, sundin ang mga tagubilin nito.

Screen test

Tingnan ang solidong pula, berde, asul, puti at itim na larawan sa katamtamang liwanag. Suriin ang dead pixels, pagbabago ng kulay at pagkislap. Ihambing sa ibang display: hindi makikita sa screenshot ang pisikal na sira ng panel. Huwag diinan ang panel.

Sensor test

Suriin ang auto-rotation sa suportadong app. Sa karaniwang tawag, takpan at alisin ang takip sa proximity area at tingnan kung namamatay at bumubukas muli ang screen. Maaaring makahadlang ang case o protector. Gumamit lamang ng sensor tests kung mayroon sa modelo; hindi nito kinukumpirma ang lahat ng sensor.

Mga listahan ng test code ayon sa brand

Display & Touchscreen

Verify screen colour uniformity, dead pixels, and touch responsiveness across the whole panel.

*#0*#
1. Dial the code to open the built-in test menu.\n2. Cycle Red, Green, Blue and White screens — look for dead or stuck pixels.\n3. Run the touch test and draw across every edge to confirm digitizer response.

Battery Health

Check current battery voltage, temperature and charging behaviour.

*#*#4636#*#*
1. Dial the code and open Battery information.\n2. Note the current charge, temperature and health status.\n3. Compare voltage under load vs idle to spot a degrading cell.

Network & Signal

Inspect signal strength, cell ID and neighbouring towers.

*3001#12345#* (iOS) / *#*#4636#*#* (Android)
1. Dial the code for your platform.\n2. Read the signal in dBm — closer to 0 is stronger.\n3. Note cell ID and PLMN for troubleshooting weak-signal areas.

Sensors

Test accelerometer, gyroscope, proximity and light sensors.

*#0*#
1. Open the test menu.\n2. Select Sensors and verify each sensor reacts to motion, light, or covering the proximity area.\n3. Fail any sensor that does not update.

Speaker & Vibration

Confirm the earpiece, loudspeaker and vibration motor all fire.

*#*#0842#*#*
1. Run the vibration test — the phone should pulse.\n2. Run the melody / speaker test and listen for distortion.\n3. Place a call to verify the earpiece.

Camera

Trigger front and rear cameras through the diagnostic menu to spot lens or sensor failures.

*#0*#
1. Open the built-in test menu.\n2. Launch front and rear camera tests.\n3. Look for stuck pixels, discolouration, or autofocus failures.

GPS

Verify GPS satellite lock and location fix accuracy.

*#*#1472365#*#*
1. Dial the code and start the GPS test.\n2. Move outdoors and wait up to 60 seconds for a fix.\n3. Confirm satellites in view and accuracy in metres.