فون کی تشخیص کا ٹول

یقین نہیں کہ آپ کا ہارڈویئر خراب ہو رہا ہے؟ اپنے فون کے بلٹ اِن تشخیصی کوڈز استعمال کرکے رہنمائی کے ساتھ یہ جانچیں انجام دیں۔

ٹچ، اسکرین اور سینسر جانچ

یہ فون پر رہنمائی والی جانچ ہے، براؤزر کی پیمائش یا مرمت کی تشخیص نہیں۔ پڑھنے کے لیے ادائیگی یا ڈاؤن لوڈ نہیں چاہیے۔

ٹچ ٹیسٹ

اسکرین صاف اور خشک کریں، چارجر ہٹائیں اور خراب پروٹیکٹر اتاریں۔ ڈرائنگ ایپ میں درمیان اور کناروں پر مسلسل لکیریں بنائیں۔ خلا یا غیر متوقع نشان ٹچ مسئلہ بتا سکتے ہیں؛ ری اسٹارٹ کے بعد دہرائیں۔ مینو میں ٹچ گرڈ ہو تو اس کی ہدایات مانیں۔

اسکرین ٹیسٹ

درمیانی روشنی پر مکمل سرخ، سبز، نیلی، سفید اور سیاہ تصاویر دیکھیں۔ مردہ پکسل، رنگ کی تبدیلی اور جھلملاہٹ جانچیں۔ دوسرے ڈسپلے سے موازنہ کریں: اسکرین شاٹ پینل کی جسمانی خرابی نہیں دکھاتا۔ پینل پر دباؤ نہ ڈالیں۔

سینسر ٹیسٹ

معاون ایپ میں خودکار گردش جانچیں۔ عام کال میں قربت والے حصے کو ڈھانپیں اور کھولیں؛ اسکرین بند اور دوبارہ روشن ہوتی ہے یا نہیں دیکھیں۔ کور یا پروٹیکٹر رکاوٹ بن سکتے ہیں۔ سینسر ٹیسٹ صرف ماڈل میں دستیاب ہو تو کریں؛ اس سے ہر سینسر درست ثابت نہیں ہوتا۔

برانڈ کے لحاظ سے ٹیسٹ کوڈ فہرستیں

Display & Touchscreen

Verify screen colour uniformity, dead pixels, and touch responsiveness across the whole panel.

*#0*#
1. Dial the code to open the built-in test menu.\n2. Cycle Red, Green, Blue and White screens — look for dead or stuck pixels.\n3. Run the touch test and draw across every edge to confirm digitizer response.

Battery Health

Check current battery voltage, temperature and charging behaviour.

*#*#4636#*#*
1. Dial the code and open Battery information.\n2. Note the current charge, temperature and health status.\n3. Compare voltage under load vs idle to spot a degrading cell.

Network & Signal

Inspect signal strength, cell ID and neighbouring towers.

*3001#12345#* (iOS) / *#*#4636#*#* (Android)
1. Dial the code for your platform.\n2. Read the signal in dBm — closer to 0 is stronger.\n3. Note cell ID and PLMN for troubleshooting weak-signal areas.

Sensors

Test accelerometer, gyroscope, proximity and light sensors.

*#0*#
1. Open the test menu.\n2. Select Sensors and verify each sensor reacts to motion, light, or covering the proximity area.\n3. Fail any sensor that does not update.

Speaker & Vibration

Confirm the earpiece, loudspeaker and vibration motor all fire.

*#*#0842#*#*
1. Run the vibration test — the phone should pulse.\n2. Run the melody / speaker test and listen for distortion.\n3. Place a call to verify the earpiece.

Camera

Trigger front and rear cameras through the diagnostic menu to spot lens or sensor failures.

*#0*#
1. Open the built-in test menu.\n2. Launch front and rear camera tests.\n3. Look for stuck pixels, discolouration, or autofocus failures.

GPS

Verify GPS satellite lock and location fix accuracy.

*#*#1472365#*#*
1. Dial the code and start the GPS test.\n2. Move outdoors and wait up to 60 seconds for a fix.\n3. Confirm satellites in view and accuracy in metres.