Vivo Test Codes & Secret Codes (2026) — Hardware, Touch & Dialer Codes

Funtouch / OriginOS codes

Vivo Hardware & Touch Test Codes

Looking for a Vivo test code to check your phone rather than change settings? Start with the database-listed options below. Vivo hardware test menus vary by model, Funtouch OS or OriginOS version, region and dialer.

Vivo hardware test menu

*#558#

The database lists this component-test menu for some Vivo models, but marks it unverified. If it opens, use only the available read-only display, touch, audio or sensor checks. Do not assume every option is present.

Community-reported · unverified

Vivo testing & phone information

*#*#4636#*#*

The Vivo database entry describes phone information, battery and usage statistics. This is not a complete hardware test or a guaranteed touch test; available information varies with firmware.

Verified database entry · availability varies

Touch response test code

*#*#2664#*#*

This database entry is shared from generic Android codes, not verified for Vivo compatibility. It describes a touch response test; modern Vivo firmware may ignore it. Prefer the guided touch checks below if it does not open.

Generic Android code · not confirmed for Vivo

No single Vivo touch test code works on every phone. If a code does nothing, that alone does not mean your hardware is faulty. Use read-only tests; avoid calibration, reset and engineering settings.

Vivo touch, screen & hardware checks

These are guided checks on your phone, not browser-run measurements or a repair diagnosis. No payment or download is required to read them.

Vivo secret codes work across both Funtouch OS and OriginOS and lead to a factory test menu covering the display, multi-touch tracking, speakers, receiver, microphones, cameras, vibration motor, proximity and light sensors, gyroscope and fingerprint reader. Each test reports a clear pass or fail, which makes the menu genuinely useful when you are buying a used handset.

A quick pre-purchase routine on any Vivo device is to dial the hardware test, run the display and multi-touch checks first, then the audio loop, then the sensors. Five minutes of testing catches the faults that are expensive to fix later, and the results are far more reliable than a visual inspection.

Vivo devices also respond to universal GSM interrogation strings such as IMEI display and call-forwarding status. As always, treat reset codes as live commands: on most Vivo firmware the wipe begins the instant the sequence is accepted, without a confirmation prompt, so take a backup before you go anywhere near that category.

Checking a used Vivo handset? Run its IMEI through our free IMEI checker — dial *#06# to reveal the 15-digit number.

Full Vivo secret code list (40 codes)

Every code below is documented from public device and service documentation. None of these codes erase user data, but always read the risk column first.

Vivo secret codes with description, category and risk level
CodeWhat it doesCategoryRisk level
Show IMEI. Displays the device IMEI number.infoSafe — read only
Testing & Usage Menu. Phone info, battery and usage statistics.diagnosticsSafe — read only
Hardware Test. Opens a component/hardware test menu on some Vivo models.Community-reported · unverifiedhardware-testSafe — read only
Engineer Mode. Opens Vivo's engineer mode for background diagnostics.diagnosticCaution — changes settings
Service / Hardware Tests. Opens a service test menu on some Vivo/Funtouch builds.Community-reported · unverifiedhardware-testSafe — read only
Wi-Fi MAC Address. Displays the device's Wi-Fi MAC address.infoSafe — read only
Call Forwarding Status. Shows whether all-call forwarding is active and to which number.networkSafe — read only
Forwarding When Unanswered. Shows the number that receives calls you don't answer.networkSafe — read only
Forwarding When Unreachable. Shows where calls go when your phone is off or has no signal.networkSafe — read only
Forwarding When Busy. Shows the number that receives calls while you're on another call.networkSafe — read only
Cancel All Forwarding. Turns off every type of call forwarding on the line.networkCaution — changes settings
Caller ID Status. Shows whether your number is hidden or shown on outgoing calls.networkSafe — read only
Factory Data Reset (partial). Clears app data, downloaded apps and accounts. Keeps system apps. Back up first.resetCaution — changes settings
GPS Test. Runs a quick GPS test to verify satellite lock and location performance.diagnosticsSafe — read only
Wireless LAN Test. Opens the Wi-Fi / wireless LAN test screen.hardware-testSafe — read only
Vibration & Backlight Test. Runs a test cycle for the vibration motor and screen backlight.hardware-testSafe — read only
LCD Display Test. Opens the screen test suite (colors, dead pixels, touch).hardware-testSafe — read only
Touchscreen Test. Tests touch response across the screen.hardware-testSafe — read only
Proximity Sensor Test. Verifies the proximity sensor used to blank the screen during calls.hardware-testSafe — read only
Audio / Melody Test. Runs a speaker and audio playback test.hardware-testSafe — read only
Bluetooth Test. Opens the Bluetooth hardware test screen.hardware-testSafe — read only
Camera Information. Shows camera firmware details. Avoid the firmware-update option unless you know what you're doing.diagnosticsCaution — changes settings
Field Test (GSM). Runs a GSM field/signal test.diagnosticsSafe — read only
Call Waiting Status. Shows whether call waiting is currently enabled.networkSafe — read only
Service Mode. Opens the service/test mode menu on many devices. Advanced — for diagnostics only.diagnosticsCaution — changes settings
Call Barring Status. Shows whether outgoing/incoming call barring is switched on.networkSafe — read only
Enable Call Waiting. Turns on call waiting so a second caller can reach you mid-call.networkCaution — changes settings
Disable Call Waiting. Turns off call waiting.networkCaution — changes settings
Build & Version Info. Shows PDA, phone, CSC and build-time information.infoSafe — read only
Touchscreen Firmware Version. Displays the touchscreen controller firmware version.hardware-testSafe — read only
RAM Version. Shows the device RAM type/version.infoSafe — read only
Packet Loopback Test. Runs an audio/packet loopback hardware test.hardware-testSafe — read only
Melody / Audio Test. Plays a test melody to check the speaker.hardware-testSafe — read only
Bluetooth Address. Displays the device's Bluetooth MAC address.infoSafe — read only
Advanced GPS Test. Opens a detailed GPS/location diagnostics screen.diagnosticsSafe — read only
PDA / Phone / RF Info. Shows PDA, phone, hardware and RF firmware version details.infoSafe — read only
Power-Button Behaviour. Changes what the power button does on long-press (end call vs menu). Changes a setting.diagnosticsCaution — changes settings
Backup Media Files. Opens a file-copy screen to back up media (photos, videos, audio).diagnosticsCaution — changes settings
MediaTek Engineer Mode. Opens the engineer menu on MediaTek (MTK) chipset phones. Advanced — changing values can affect radios.diagnosticsCaution — changes settings
Google Talk Service Monitor. Legacy GTalk service monitor screen (older Android).Community-reported · unverifieddiagnosticsSafe — read only

How to use Vivo codes

  1. Open the Vivo dialer and go to the keypad, exactly as if you were dialling a number.
  2. Type the code precisely as shown, including the leading * and the trailing #. Autocorrect and paste can drop characters, so type it out.
  3. Most sequences fire the moment the final character is entered — you usually do not press call.
  4. If the screen does not change, press the call button once; a few USSD strings need it.
  5. Back up photos, messages and app data before running anything marked destructive, then confirm you are on the right device.
  6. Nothing at all happening usually means the code is disabled on your firmware or blocked by your carrier — it is not a fault with your handset.

Vivo test codes — FAQ

What is the Vivo test code?

The database lists *#558# as a hardware test menu on some Vivo models, but marks it unverified. *#*#4636#*#* is listed for testing and phone information, not a full hardware test. Availability depends on model and firmware.

How do I run a Vivo hardware test?

Open the phone dialer and type the listed code exactly. If a menu opens, use its read-only component checks and follow its instructions. Avoid reset or calibration options. If no menu opens, use our guided screen, touch and sensor checks; do not treat a blocked code as a hardware failure.

What is the Vivo touch test code?

There is no confirmed universal Vivo touch test code. *#*#2664#*#* is a generic Android database entry, not confirmed for Vivo. If your model’s hardware menu offers a touch test, use it; otherwise draw lines across the screen in a drawing app to check response.

Do Vivo test codes work for free?

Entering a local diagnostic code does not require a MobileCodes subscription. These guided checks are free to read. Compatibility is not guaranteed, and carrier USSD services or calls may have separate charges; do not confuse them with local hardware tests.

Do all Vivo phones support the same secret codes?

No. Code support depends on the model, the firmware version and in many cases the carrier that supplied the handset. Older Vivo models often expose more service menus than the newest releases, because manufacturers gradually lock engineering tools behind signed diagnostic apps. If a code does nothing, it has almost certainly been removed or disabled on your build rather than typed incorrectly.

Is it safe to dial Vivo secret codes?

The codes we mark as "safe" only display information or open a read-only test menu, so they cannot damage your phone. Codes marked "caution" change a setting or start a hardware routine you should understand first, and codes marked "destructive" erase user data instantly with no confirmation dialog. Always back up before running anything in the destructive category.

Why does nothing happen when I enter a code?

Three common reasons: the code is not supported on your firmware, your network operator has blocked the USSD string, or the dialer requires you to press the call button for that particular sequence. Try the code on a different SIM or in airplane mode, and confirm every character including the leading asterisk and trailing hash.

Will using these codes void my Vivo warranty?

Simply reading diagnostic information does not void a warranty. However, changing radio band settings, running write operations in an engineering menu, or performing a factory format can leave your device in a state a service centre may treat as user-caused. Stick to read-only codes unless you are following official repair guidance.

Can these codes unlock a network-locked Vivo phone?

No. Network unlocking requires a carrier-issued unlock code or an official unlock request through your operator. Any site promising a free universal unlock dial code is misleading you. The codes listed here only expose diagnostics, network status, firmware information and factory reset routines.

How do I find my IMEI on a Vivo device?

Dial *#06# on any GSM or LTE phone, including every Vivo model, and the IMEI appears immediately. You can also validate the number with our IMEI checker, which runs the Luhn checksum used by the GSMA to detect mistyped or invented IMEI numbers.

Vivo Troubleshooting Guides

All Vivo guides →